Poly Diallyldimethylammonium Chloride Smelless Tasteless And Harmless
Appearance | colorless or light-clolor sticky liquid |
PH | 3.0~6.0 |
Solid content | 40±1% |
mpa.s,25℃ | 8000-12000 |
Technical Name | Polydimethyl-dislkelen-ammonium Chloride / Polydadmac |
Detailed Product Description
PDADMAC is cationic polymer and it can be completely dissolved in water.
Application Method
1. In dealing with different source water or waste water, the dosage is based on the turbidity and the concentration of the water. The most economical dosage is based on the trial.
2. It is better to dose the product continuously
3. When used alone, it should be diluted to the concentration of 0.05%-0.5% (based on solid content).
4. The dosing spot and the mixing velocity should be carefully decided to guarantee that the chemical canbe mixed evenly with the other chemicals in the water and the flocs can not be broken.
Attention:
Setting detailed fixing process should accorading with factory matter of factory and experiment.
The washing tank is must be washed thorough before fixing,for fear of oddment affect fixing effect.
It is favorable to fixing color that raise the fixing color dose and temperature ,but excess could result in color transform.
Application Field
1.It is adaptable to wide range of pH value, between 4.0 and 10.0.PDADMAC enjoys small dosage but can cause big flocs, rapid precipitation and low turbidity residue, and it can also produce small amount of sludge.
2.The polymer body contains strong cationic group radical and activated-adsorbent group radical which can destabilize and flocculate the suspended solids and the negative-charged water soluble matters in the waste water through electro-neutralization and bridging adsorption. It is very effective in flocculating, decoloring, killing algae and removing organics.
3.It can be widely used to treat source water and sewage water. It is smelless, tasteless and harmless.
Package and Storage
1.It is packaged in plastic drums with each containing 50kg and 200kg.
2.Sealed and stored in cool place, avoid solarization
3.Appear layer after a long-term storage, but the effect will not be affected with stir.